Truck Bodies

Dump Bodies

 
 
 
Snow & Ice Equipment

Aluminum One-Ton Dump

Our aluminum ZEUS dump bodies for one-ton chassis save about 500 lbs over steel dumps, but offer the same [Main]  hoist ratings to get your jobs done quickly using less fuel. ZEUS features three to four yard capacity, double acting hoist, 50 degree dump angle, up to 3/16” floor thickness and cross sills every five inches. This item ships completely assembled, with subframe painted, and comes with all stainless steel hardware.
 
The new ZEUS one-ton dump body for up to 19,500 LB GVWR chassis, will permit you to haul up to 500 lbs more each load because ZEUS’s robust aluminum construction saves 500 lbs over like-sized steel bodies with equivalent hoist ratings.
 
Never sandblast or re-paint your one-ton steel dump body again to try to get another few years out of it. The new ZEUS will stay looking sharp with little maintenance, and you will be able to move it to a new chassis someday without having it crumble apart because of all-too-familiar cancer rust. Saltwater boats, aircraft and automotive applications have demonstrated time and again that if selected properly, aluminum will withstand saltwater and moisture corrosion much better than steel without costly paint maintenance. According to The Aluminum Association’s website, www.aluminum.org , “Automotive and light truck applications accounted for almost 6 billion pounds of aluminum shipments in 2006.” That’s a lot of rolling aluminum, and TruckCraft knows how to design and build rugged and durable products using aluminum!
 
If clean design and well executed workmanship, rugged but easy-to-use controls and latches, 500 lb weight savings over steel, maintenance free appearance are things you want, see the ZEUS all-aluminum body at your local TruckCraft dealer today.
 
 
 
Hoists
 
 
 
Liftgates
 
 
 
Cranes
 
 
 
Lights

Features

TC-410 SPECIFICATION
.
  • Chassis: 12,000 to 15,000 GVWR, 60”
  • C.A. Bed Size: 96” wd. X 9’-4” lg.
  • Side Height: 16-1/2”, (permanent or
  • drop 180°)
  • Tailgate Height: 22-1/2” (drop 180°)
  • Volume Capacity: 3 1/3 cu yds to top of
  • sides
  • Hoist Rating: 10,400 lb
  • Floor Height: 11-1/8” above truck
  • frame
  • Cab Guard: Quarter or Half, bolt on
  • Weight: 1,240 lbs (assembled w/ hoist,
  • 1/2 cab guard & drop sides)
  • Max Dump angle: 50°
  • Floor Constr: 6061-T6 heat treated
  • aluminum extrusions w/ crossmembers
  • every 5”
  • Operating System: Monarch
  • electric/hydraulic power unit – Double
  • acting
  • Lighting: LED Lights with wiring
  • harness factory installed
  • Warranty: Two years
 
TC-420 SPECIFICATION
 
  • Chassis: 14,000 to 19,500 GVWR, 60”
  • C.A.
  • Bed Size: 96” wd. X 9’-4” lg.
  • Side Height: 16-1/2”, (permanent or
  • drop 180°)
  • Tailgate Height: 22-1/2” (drop 180°)
  • Volume Capacity: 3 1/3 cu yds to top of
  • sides
  • Hoist Rating: 21,400 lb
  • Floor Height: 13-3/8” above truck
  • frame
  • Cab Guard: Quarter or Half, bolt on
  • Weight: 1,690 lbs (assembled w/ hoist,
  • ½ cab guard & drop sides)
  • Max Dump angle: 50°
  • Flr Const: 3/16” thick 6061-T6 heat
  • treated aluminum extrusions w/
  • crossmembers every 5”
  • Operating System: Monarch
  • electric/hydraulic power unit – Double
  • acting
  • Lighting: LED Lights with wiring
  • harness factory installed
  • Warranty: Two years
 
TC-425 SPECIFICATION
 
All aluminum 3.2 yd. dump body made specifically for 14,500 GVWR, 86.5″ C.A. ISUZU NPRs. Body weight 1,800 lbs, correct center of gravity for this chassis, 16,600# dump rating, 50 degree dump angle, drop or rigid sides.
 
TC-430 SPECIFICATION
 
  • Chassis: 14,000 to 19,500 GVWR, 84”
  • C.A.
  • Bed Size: 96” W X 11′ L
  • Side Height: 16-1/2”, (permanent or
  • drop 180°)
  • Tailgate Height: 22-1/2” (drop 180°)
  • Volume Capacity: 4 cu yds to top of
  • sides
  • Hoist Rating: 16,600 lb
  • Floor Height: 13-3/8” above truck
  • frame
  • Cab Guard: Quarter or Half, bolt on
  • Weight: 1,850 lbs (assembled w/ hoist,
  • 1/2 cab guard & drop sides)
  • Max Dump angle: 50°
  • Flr Const: 3/16” thick 6061-T6 heat
  • treated aluminum extrusions w/
  • crossmembers every 5”
  • Operating System: Monarch
  • electric/hydraulic power unit – Double
  • acting
  • Lighting: LED Lights with wiring
  • harness factory installed
  • Warranty: Two years
 
 
 
Compressors
 
 
 
Toolboxes & Van Shelving
 
 
 
Specialty Products
 
 
 
Parts
 
 
 
Service
 
 
 
Contact Us

Options (All Models)

  • 1/2 or 1/4 Cabguard
  • Rigid or Drop Sides
  • Deduct Avail for No Hydraulic Pump,
  • Hose, Power Cables